24-324359 Bilstein 5100 Series Ride Height Adjustable Front Shocks paired with 25470 SPC Light Racing Upper Control Arm Kit (UCA’s) for 2005-2015 Toyota Tacoma 4WD & PreRunner

24-324359 Bilstein 5100 Series Ride Height Adjustable Front Shocks paired with 25470 SPC Light Racing Upper Control Arm Kit (UCA’s) for 2005-2015 Toyota Tacoma 4WD & Pre-Runner

Enjoy ultimate customization and superior suspension performance with this Bilstein 5100 Series 2.5" Adjustable Front Shocks with SPC Upper Control Arm Kit for 2005-2015 Toyota Tacoma. Benefit from an increased camber and caster change for superior ride quality and tire wear, along with more articulation and strength than the original OEM arm. Rubber bushings and an OE-style ball-joint assembly provide a reliable suspension solution.

Kit Includes:

Quantity 2 - Bilstein 24-324359 Front Shocks (Ride Height Adjustable)

Quantity 1 - SPC Specialty 25470 – Light Racing Upper Control Arm Kit (Box is a pair)

Fitment:

2003-2009 Toyota 4Runner (6 Lug)

2005-2015 Toyota Tacoma

2005-2015 Toyota Tacoma 4WD (6 Lug)

2005-2015 Toyota Tacoma Pre-Runner  4WD (6 Lug)

2003-2009 Lexus GX470

Fitment Notes:

6 Lug Only

24-324359 Bilstein 5100 Series Shocks offer ride height adjustability, and are designed for front coilover style pickup and SUV suspensions. These shock absorbers have multiple snap ring grooves to position the spring seat to set the ride height of your choice. 

Circlip 4 – 2.5” - (depending on application)

Circlip 3 – 1.75” - (depending on application)

Circlip 2 – 0.85” - (depending on application)

Circlip 1 – Stock Ride Height - (depending on application)

• Reuse the vehicle front OEM Stock coil springs
• Bilstein’s Monotube Design
• Ride Height Adjustable
• Provide increased wheel travel

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting.  Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

Specialty Alignment – SPC Light Racing Upper Control Arm Kit – Part Number # SPC 25470

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms on many Toyota trucks SUVs. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications.

Tacoma’s often run out of factory adjustment when you install any type of lift kits. With Specialty Products Company (SPC) UCA Upper Control Arm provides and additional +2 degree of caster and 0 degree to +5 degrees of camber change. Built with OE style ball joints and bushings, this arm will help you to correct alignment angles while maintaining your factory ride quality.

Get more droop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions.

Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its pantented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber.

Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.

Do you need replacement cams for the lower arm? Check out SPC p/n 25435, which will replace corroded cam bolt assemblies.

* On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.

Part Number: SPC 25470 and Bilstein 24-324359

UPC 651860887005, 082642254706

Bilstein 5100 Series 2.5" Adjustable Front Shocks with SPC Upper Control Arm Kit for 2005-2015 Toyota Tacoma

24-324359 Bilstein 5100 Series 2.5" Adjustable Front Shocks with 25470 SPC Upper Control Arm Kit for 2005-2015 Toyota Tacoma

Bilstein 5100 Series 2.5" Adjustable Front Shocks with SPC Upper Control Arm Kit for 2005-2015 Toyota Tacoma